Draw Wire Sensors / Potentiometers (Analog)
AWP 110
Draw Wire Sensor - Small Size, High Strength Stainless Steel Wire
Draw Wire Sensor - Small Size, High Strength Stainless Steel Wire
A compact draw wire sensor for short strokes with potentiometric or analog output. The AWP 110 converts linear motion into potentiometric, voltage, or current analog output using a stainless steel wire and rotary potentiometer.
Stroke up to 1,200 mm - 0–100 mm or 0–1,200 mm versions
Potentiometric, 0–10 VDC, or 4–20 mA - broad PLC compatibility
±0.5% FS linearity - suitable for general position monitoring
IP53 rated - protected against dust and spray
5 N retraction force - light wire tension
~550 g - compact and easy to install
| Stroke (Measuring) Length | 0–100 mm and 0–1,200 mm |
| Supply Voltage (Analog/Voltage) | 12–30 VDC |
| Supply Voltage (Potentiometric) | 42 V max. |
| Output Signals | Potentiometric, 0–10 VDC, 4–20 mA |
| Linearity | ±0.5% FS |
| Maximum Speed | 0.5 m/s |
| Required Force | 5 N |
| Resistance | 5 KΩ (standard), 10 KΩ |
| Measuring Type | Potentiometric |
| IP Protection | IP53 |
| Operating Temperature | −25°C to +85°C |
| Relative Humidity | 95% |
| Weight | ~550 g |
| Housing Material | Aluminium / Steel / Plastic |
| Measuring Wire | Stainless Steel |
| Connection Cable | 3 m (standard), 5 m, 10 m |
Contact us for the full technical drawing (PDF)
Get a quote, confirm specifications, or ask a technical question.